Slope Stabilization

You Still Have A Question

if you cannot find answer to your question our FAQ, you can alwas contact us. web will answer you shortly!

A flexible system for slope stabilization is the combination of a set of ground anchors and a continuous flexible membrane, which must be braced in its entire perimeter and it must internally have connected to the anchors in the system. P&G Geohazard Solutions uses wire mesh such as 3S Tutor 100/3.4 or TechSlope 100/3.4 for mitigating unstable slopes in combination with Self-drilling anchors or CT bars. A layer of coir mat/ geo-synthetic mat shall be used for vegetation growth. Alternatively, hydroseeding may be applied for rapid vegetation.

Durable Rock Stabilization Using Shotcrete Technology

Active stabilization can also be done using shotcrete in combination with a welded wire mesh & anchors. Depending upon site conditions Wet & Dry Shotcrete shall be selected. This technique is particularly effective in stabilizing steep or unstable slopes consisting of fractured rock, where it provides a strong, durable surface that resists erosion and supports the underlying soil or rock. The usefulness of shotcrete lies in its ability to conform to irregular surfaces, its rapid application, and the fact that it can be applied in layers to build up thickness as needed.

FLEXIBLE DEBRIS FLOW BARRIERS

Flexible Debris Flow Barriers are made out of ring nets are an advance solution for mitigating the risk associated with debris flow especially during cloud bursts and flash floods in mountainous region. P&G Geohazard Solutions design, supply & install both wide & narrow channel debris flow barrier with or without posts. During an event the flexible barrier absorbs and dissipates the energy of the moving debris allowing water to pass through while trapping and containing the rocks, soil and other large materials.

P&G can supply Debris Flow Barrier for a maximum pressure of 282 kPa and to resist an impact energy of 5371 KJ.

SHALLOW LANDSLIDE BARRIER

These are engineered structures designed to prevent or reduce the impact of landslides that occur near the surface, typically involving thin layers of soil & debris. These barriers are strategically placed on slopes where shallow landslides are likely to occur, acting as physical barriers to intercept and contain the sliding material before it can reach vulnerable areas such as roads, buildings, or other infrastructure.

P&G Geohazard Solutions offers Shallow Landslide Barriers of upto 212 kPa.

Call Support Center 24/7

+1 809 120 6705

Write To Us

info@domain.com

Contact us

Get in touch with us